Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Loco Made Using a Stanton Drive 4 Wheel Truck and Dummy
Reader Robert models HO and asks this question:
“I have made a loco using a Stanton drive 4 wheel truck and dummy. It runs OK on the flat or running up grade, when descending grades it runs with a very jerky motion. Any suggestions on how to remedy the problem?”
3 Responses to Loco Made Using a Stanton Drive 4 Wheel Truck and Dummy
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
I am running DC not DCC.
I think the problem of jerky action while descending grades may be due to the gears. I have many locomotives that will do the same jerking while descending grades. I have found that it is because of the back pressure placed on the gears, causing them more friction, especially worm type gears. The gears will start to bind with the excess weight pushing on the gears. This doesn’t happen with the other gear types, only the worm gears. I have no solutions for this problem. The worm gears do require some amount of “Play” to function, and the grade back pressure on the gears reduces the play, and causes binding.
Thanks Jay. I have solved the problem by converting this loco into a shunter so no grades to descend in my yard!!