Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
3 Responses to Current Keepers on DC Layout
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
Joe,
They definitely make current keepers for n scale. Your problem will be getting the electricity out of them when needed. In DCC it is the decoder that looks after this but in DC you have nothing to switch from track power to the current keeper when the track power drops off. You might be able to do it with a micro controller, just be sure the polarity is correct or your trains may do a very quick reverse back into the powered section. Better to have good track work and loco pickups along with clean track and wheels.
Bill
Joe,
firstly, what do you mean by “current keeper”. It is not an expression with which I am familiar. If what you want to do is keep lights glowing on stopped locos or in carriages, or to make sure those locos fly over dead frogs or dirty track then there are a number of products on the market with names like “stay alive” They are small capacitor discharge units. Most unfortunately too big for N scale locos, but some would fit in a box car, maybe even a tender. As always, check the hobby literature, read the adverts.
No it won’t work dcc is a power the decoder changes it to DC your track is dc and polarity is changed buy track currant keepers pick up dc off the decoder to charge up the power is feed back into the decoder thru the bridge that keeps the polarity correct the problem is when you go into Rev track power will fight the currant keeper power output so it would be like you don t have a currant keeper