Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Why Do Some Lash-Up Engines Face Backwards?

As a follow-up to Steven’s earlier question, club member David G asks readers this question:

“I have seen a locomotive hooked up backwards when there are 2 or 3 or even more of them lashed-up together – why would that be?  Is this for mechanical or maybe operational reasons? I wondered if it just makes it easier to link them that way rather than turning the loco around while it’s in the yard?

My other question is – when the engines are lashed-up, are all the locomotives always operating to full power… or could a locomotive sometimes be in tow?”

locomotive lash up

Use the COMMENTS link below if you know the answer, or want to see what others have to say.

5 Responses to Why Do Some Lash-Up Engines Face Backwards?

  • Larry says:

    If I am understanding the question, it is for the return trip. Say the Main line is an East-West route, the
    Engines are mated together, facing opposite directions. The Locomotives do not use a transmission that a personal Vehicle does. So the traction and gearing mirror each other. (Work the same in both directions). Rotating Turntables are not used much in my area.

  • John Mauro says:

    I don’t know

  • Tim Morlok says:

    As a former Union Pacific trainman/conductor, I can say that each engine in the multi-unit consist is controlled from the lead unit via the MU cables between each unit. Some of the units can be on line and some can be just in tow ( transferring power to a location where they are needed). Some times the power of the whole consist is not needed. Depending on the tonnage and grades in the part of the run the train is on, the dispatcher and the engineer will determine the number of units on line at any given time. The engineer must manually isolate or shut down each unit that is not needed. Except in cold weather conditions, the units are usually shut down (to save fuel) for the part of the run that they are not in use. The direction that each unit faces does not matter except in the case as stated in the reply above.

  • WES says:

    Tim Morlok’s answer about engine facings is a good one.

    Regarding whether they are all used or not, sometimes one or more diesel will be powered, producing power (AC or DC, depending on the particular manufacturer) to applied to traction motors on various axles. This way, the power can be energizing many wheels to provide better pulling power (think of the physics of a Shay engine).

    To help determine how many and which diesels are actually operating, watch for heat waves above each loco’s stack. These are the units providing the electricity.

  • Frank B says:

    For long freight trains, multiple locos will be needed to provide sufficient force to pull the train.

    For convenience, the power consist (the set of locos) will be assembled with a cab at each end to avoid having to turn them all round at each end of the line. A siding can then be used to easily run the loco set from one end of a freight train to the other, and the engineer just gets in the other cab.

    “A” locos have a cab. “B” locos don’t, but (with the trailing “A”s) are all controlled from the cab of the leading “A” unit.
    So a power consist of four locos might be A-B-B-A, to have a cab at each end.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive