Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

Shaping People Figures to Fit Different Railroad Scenes

Rick who models N scale has this question for others in the hobby:

“I was wondering if there was an easy way to shape arms, legs and bodies to suite different scenes.  Such as a camp fire sit, or bending to pick something up, etc.”

Add your COMMENT below.

3 Responses to Shaping People Figures to Fit Different Railroad Scenes

  • J E Wilsonsays:

    Easy way? not really – I modified the front of a regular heat gun using kitchen foil and a small paintbrush to make the approximately 1/16″ hole out. I use the heat gun on low and hold the model with 2 sets of tweezers – one on each side of where I want it to bend. Carefully and not long, I put the figure in front of the heat gun where the air comes out – short bursts both sides until I can feel the figure to start to be bendable and continue until I get the result I want. It always seems like a long procedure, but after I ruined quite a few, I finally get the result I want. Not enough heat it can break and too much heat it will melt. Start on figures you do not care about and learn what works best. Samr procedure on plastic or lead figures just different heat times.. Do Not Use An Open Flame (I had disastrous effects) Once you get it down, you will like what you can do. Hope that helps.

  • Frank Bsays:

    Another way is to cut an arm precisely at the shoulder, the glue it back at the required angle.
    Cut with a very sharp craft knife, or a very sharp sprue cutter.
    File or cut the limb base to the necessary angle.
    Fix with liquid poly cement (MEK or DCM) (the pure solvent) applied with a fine paintbrush.
    Use model filler to close any gap.

  • Robert Bradysays:

    The only figures I’ve modified were bathers in a house pool ,while the clear caulk was fresh i cut the legs off so either looked waste deep ,shoulder deep or siting on coving. when observed by family members or friends they just had to touch water to see if it was real,lol.

Leave a Reply to Robert BradyCancel reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Use Tiny Railroad Micro Controllers



A micro controller is basically a small programmable computer device to help the model railroader “make things operate.” It is clever way to realistically replicate the movements, actions and functions you are likely to see on a full size railroad.

Download Your Free Catalog



















N Scale Track Plans

Watch Video

SUBMIT YOUR QUESTION

Submit Your Model Railroading Questions!

Before you submit your model railroading question please add some feedback, answers or comments to other postings on this model train blog. What goes around comes around... so if you can help others in the hobby, someone else may help you.

Important - Please add plenty of supporting details to any question you submit (eg. scale, solutions you have already tried etc.) , as the clearest and best questions usually get the best answers. Also, please check your spelling and punctuation as all questions need to be approved by the blog moderator prior to publication. Approved questions are normally published within a week (if not sooner).

Submit your model train questions here.

Watch These Club Videos

Club members access helpful new resources each month: diagrams, video tutorials, articles, track plans and more. Watch the tour videos here.

Scenery Techniques Explained

Everything DCC

NEW TO MODEL TRAINS?

HO TRACK PLANS

Model Train Help Ebook

Bringing Your Railroad To Life!

Scenery & Layout Ideas

Share With Friends

 

Submit Your Article

Would you like to write an article and have it published?

Preference will be given to articles that help others progress in the hobby, maybe suggesting an idea for their layout, a quick tip or two... or perhaps a little bit of good advice based on your model railroading experiences.

We are all in this hobby together, so the more we can do to share ideas and help each other, the better.

Submit Your Article Here

It’s YOUR Railroad!

Your rolling stock and locomotives might actually be the center of attention on your layout, but the scenic features that surround and envelop your layout is what's likely to make your train setup stand proud of the rest. Your selection of scenery and structures will add an element of customization that will make your railroad truly unique.



Scenery, structures, and fine detailing is a fundamental aspect of any good model railroad, particularly if it is intended to replicate a true-to-life railroading scene. How realistic or authentic you make your railroad is entirely up to you... and you alone.

Some enthusiasts like to replicate every tiny detail so as to accurately depict, in every aspect, a miniaturized version of a real life scene.

Others in this hobby adopt a more "free-style" approach and choose to mix and match accessories and features they personally prefer. Even though the purist will possibly be unimpressed with unrealistic or out of context elements, it is YOUR railroad layout so you can make it anything you personally want!

Model Railroading Blog Archive

Reader Poll

Sorry, there are no polls available at the moment.