Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Track for DCC – What’s Needed?

Steve models HO and asks:

“I am thinking of converting to DCC and was wondering if I needed to change track to be able to run?”

7 Responses to Track for DCC – What’s Needed?

  • Arthur Ellis says:

    NO! you dont.

  • Nigel Woodgate says:

    I am into DCC and I have laied down ‘Peco’ flex-track, code 100 on my Woodland Scenics- Incline/Riser set, I do have two tracks , How can I drill a hole from the outside rails, down through the riser and into the 3/4 inch board! without damaging the risers!

    Nigel

  • Nigel Woodgate says:

    I am new at dcc,, all I had is a dc layout

    Please can someone help me, on how to drill a hole from the outside of my ‘Peco code 100, flex-track in through the woodland scenics incline/riser set, and into my 3/4 inch plywood board! without damaging the incline section, When wiring this up for dcc operation!

    Nigel

    • David Stokes says:

      Nigel, when drilling and setting wiring in polystyrene such as WOODLAND scenic or other type use the longest drill bill you can buy – at least as long as the deepest hole. I recommend about 4 – 5 mm diameter. After the hole is drilled, place a drinking straw over the bit (while still in the tool and slowly push the bit with the drinking straw into your hole.WHY? – some foams will eat the insulation off the wires, and some will be carrying 18 – 24 volts at 5 – 10 amps – that is enough to set a fire. And we don’t want your layout, or your house to burn down, do we?.

  • Don Jennings says:

    Steve Save your money until you have enough to purchase that new track.and good luck to you when you have all the new track you need.

  • Frank B says:

    Only the track wiring needs to be changed.

  • David Stokes says:

    Swapping wiring from DC to DCC mode is not a biggy! I recommend you read the literature from DCC Concepts or relevant articles in Model Railroader (USA), Model Rail (British) or AMRM (Australia). It is not as hard as the early “experts” made out. Fitting decoders to some older locos might test your soldering skills, and some might need their wheels changed over or the flanges ground to smaller profiles.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive