Software for CNC

Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

« Can I Run a DCC Engine on DC?

Home

1960’s Train Tracks »

February 11, 2018

Bart who models N scale asks:

“I have access to a CNC machine that will create a 3D model from a topo map in foam for my N scale train. What I need is the software that interfaces with the CNC unit. Any ideas?”

Share this...

Facebook

Twitter

3 Responses to Software for CNC

Raul Olivares says:

February 14, 2018 at 2:27 am

The software for CNC consists of a CADCAM system the CAM is what you’re looking for, is called MESHCAM. It does a fairly good job on 2D and 3D models.

Hope this helps.

Reply
- Bart Alford says:
  
  February 17, 2018 at 3:00 am
  
  Thanks
  
  Reply
Leonard says:

February 14, 2018 at 3:27 pm

I’ve been looking into 3D printing and from that I would guess you need 2 things. A 3D CAD model or program to create it. Then a G-code translator of the CAD file. I would think the translator would depend on the controller you’re using. I would google around on the controller’s manufacturer. I’m sure the mainstream industrial stuff will be expensive but there may be alternatives.

Reply