Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

DCC and DC Confusion

Gabriel posted this question for readers:

“Hi. Can DC and DCC work on the same layout by switching between the two? Can the clips for the points converting for DCC affect DC operation? I am considering also buying HO DCC equipment but to run on the same track. Thanks.”

Help for beginners here.

6 Responses to DCC and DC Confusion

  • Joshua Rinehart says:

    If you already have it wired for dc blocks, just put dcc on the secondary controller. Then you can run dc along with dcc.

  • john gould says:

    my layout was initially Dc with track blocks. As I obtained DCC equipment I had no problems running DCCtrains, BUT!!!!! make sure the blocks are separated for DCC trains up line and down line blocks are switched to the DC, crossovers covered with insulated connectors. If you then just run DCC locos over the whole system remove all DC locos off the tracks then switch all blocks as for the DCC controller. If you forget as I did and leave a dc loco on the DCC system you get a bit of a high pitched buzz and think WTF and go over 52′ of main line plus numerous sidings to figure it out as I did to find a hiding locomotive. I’m still on a learning curve and so far have no smoke issues ,Regards from Panama, John

  • Bill says:

    Yes you can but why would you. The tracks have to be fully insulated so the systems don’t “meet”. Once you have run DCC you won’t want to go back to DC.

  • phil says:

    yes, you can. I’ve converted my DC 3 pack layout to DCC by using the 4th posts on my rotaries for DCC.

  • Richard B. Walter says:

    You can install a DTDP switch to alternate between a dc power pack and a dcc system. This will allow you to run older dc locos as well as newer dcc engins but not at the same time.

  • Don Jennings says:

    Gabriel Providing you have a DCC power supply and a separate DC power supply ==YES you can do both. With clips for both systems, use one set for the one supply to operate that loco.
    NOW if you have a DIGITRAX power system, you can operate ONE DC loco at the same time as a DCC loco. I can not give you my email address but if the site leader will give you my email address we can “talk” about this

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive