Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

How to Light Up a Building

This question comes from online Train Model Club Member Nicholas:

“I want to light up some buildings. What size/type of bulbs and electrical supply do I need?”

The ASK A QUESTION link is under every post if you have a question you would like published.

7 Responses to How to Light Up a Building

  • Kevin Ching says:

    Hi Nicholas
    This depends on what lighting effect that you want you can use grain of wheat bulbs that are available in two voltages 6 and 12 volt this is ok if you want an incandescence look or use LED’s and dropping resistor if you want a different effect however LED’s are available in bright white for modern or soft white or yellow for older style light. you can also get a flickering LED for old oil lamp effect. You can get a circuit that makes the LED’s start up as a florescent style lamp you can run these off 3 volt or 12 volt depending on the size of resister used your local electronic parts shop should be able to tell you the size of the resistor for what voltage.

  • Jim Johnston says:

    Kevin, that’s the best reply possible.

  • Henry Nier says:

    I agree with above. LED’s last a long time. I have been using them for years. I use a company called Jameco electronics. Their website is Jameco.com. order free catalogue.

  • Skip Duld says:

    I ordered LED’S FROM AMOZON FOR EVERYTHING 20 BUCKS.

  • Louis van Zyl says:

    When designing a light system keep to a single voltage, say 12V. When you connect any lights to it like LED;s or bulbs that are not 12V use a limiting resistor in line. It makes live much easier when vault finding if there is a single voltage and not two or three different voltages. It also prevents accidental connection of a lower voltage bulb to a higher voltage that will cause it to blow.

  • Timothy Morlok says:

    I agree with the other comments. Any type of incandescent bulb will generate a lot of heat and draw more current than LED’s. Lower current = more lights per circuit.

  • Jstrains says:

    I use less from a christmas string. I clip off an led and put a 1k, 1/4 watt resistor in series, then power with 12 svc. It works great and cheap. I bought a string of 100 that will last me a while.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive