Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

If You Want Truly Photo-Realistic Plans – You Won’t Find Better!

Loss of Power on Points

Barry models in N scale and has this question for readers:

“Hi, I hope some one can help. Up till yesterday my track was running without any problems. After giving the track its weekly clean l found that the train run perfectly well until coming to one set of points it then stops dead. The trains run perfectly well ether side of the points. HELP PLEASE.”

6 Responses to Loss of Power on Points

  • Mikesays:

    Check that the tip of the blade is touching the rail. You may have moved it while cleanig.

    • Barrysays:

      ,
      Hi Mike , You were on the right track ,i could not see the gap at first had to use a magnifying glass ,it was the most smallest of gaps i would never had seen it with the naked eye..
      Trains running perfect.
      Many thanks,
      Barry

  • Gale Bucksays:

    I frequently have this same problem. What I have found is cleaning will “adjust” joiners, causing them to break contact. Check your joiners carefully. If they are too loose, you would be better off in the future to replacing them when you have time. Replacing joiners on older track is not always an easy task.

  • Morgan F Bilbosays:

    One of the most important parts of model railroading is track. Keeping it clean is a must. But you must be careful how you clean. Especially on turnouts. Wipe the rails and points from the frog to the point end. Do not wipe the other way, you can snag those points. The best way to clean points is to use a toothbrush/alcohol and brush the rails the same, away from the frog. After cleaning, check the points as they touch the rails to make sure they still make good contact.

  • David Stokessays:

    Your cleaning may have left detritus between the running rail and the point rail. To avoid this wire the point sets as though they are “electrofrog” style which ensures electrical continuity.

  • Frank Bsays:

    The two previous posts give you the most likely places for problems, the rail joiners and the point blades.

    Get an electrical tester to discover where the circuit is broken. Even a 12V bulb with a wire attached will enable you to discover where the problem is, by seeing how far the power goes down the lines, and where it stops.

    Get a book on model railway layout wiring. This will usually also teach basic electricity and fault finding.

Leave a Reply to David StokesCancel reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Use Tiny Railroad Micro Controllers

Model Train DCC HELP

N Scale Track Plans

Watch Video

Model Train Help Ebook

Download Your Free Catalog



















Watch These Club Videos

Club members access helpful new resources each month: diagrams, video tutorials, articles, track plans and more. Watch the tour videos here.

Scenery Techniques Explained

NEW TO MODEL TRAINS?

Model Railroad Building House Plans

rail yard buildings

SUBMIT YOUR QUESTION

Submit Your Model Railroading Questions!

Before you submit your model railroading question please add some feedback, answers or comments to other postings on this model train blog. What goes around comes around... so if you can help others in the hobby, someone else may help you.

Important - Please add plenty of supporting details to any question you submit (eg. scale, solutions you have already tried etc.) , as the clearest and best questions usually get the best answers. Also, please check your spelling and punctuation as all questions need to be approved by the blog moderator prior to publication. Approved questions are normally published within a week (if not sooner).

Submit your model train questions here.

Scenery & Layout Ideas

Submit Your Article

Would you like to write an article and have it published?

Preference will be given to articles that help others progress in the hobby, maybe suggesting an idea for their layout, a quick tip or two... or perhaps a little bit of good advice based on your model railroading experiences.

We are all in this hobby together, so the more we can do to share ideas and help each other, the better.

Submit Your Article Here

Model Railroading Blog Archive

Reader Poll

Sorry, there are no polls available at the moment.