Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Wire and Layout Software

Ed who models in HO asks:

“I have lots of wire from my old well pump (over 80 feet). Can I use it for my main wiring on my layout? I am also looking for software for Marklin K track. Any ideas?”

6 Responses to Wire and Layout Software

  • Ernst A Vahlbruch says:

    Hi there. You should probably approach this in logical steps. 1. Is the wire and insulation in good shape? Will it remain in reliable shape for the next 20 plus years? 2. What are the electrical characteristics of your wire? What current can it carry? 3. If the specs match your needs, based on your layout size and likely electrical capacity requirements, great. If not, you might consider doubling up each of the main bus lines to increase their capacity. Best of luck.

  • Louis van Zyl says:

    Hi. I have a Marklin M Track layout 4 x 4 meters. To design the layout I used software called SCARM. You can design in M, K or C tracks, It even has the conversion sections to go from K to M, K to C.
    It also has other features like adding signals. trees, roads, buildings etc. You can also then 3D render the layout to get an idea on how it will look like. I included a picture of my layout.

  • David Stokes says:

    Is your wire copper? What voltage did it carry when running your pump? If the answers are yes and mains voltage down to 12 volts, absolutely, use it. It would be ideal for bus lines, which if kept apart for + and – insulation becomes immaterial.

  • Mike says:

    You can use AnyRail 6 software for layout design. This software contains almost all types of track manufactured, including Marklin K track.

    • Terry Bell says:

      double check when using AnyRail. I like it but it may not be accurate in all circumstances
      I used this for my layout. It showed 18 turnouts for a full circle. This is 20 degrees per turnout. It should be 15 degrees.

  • Morgan Bilbo says:

    My quick thoughts: AnyRail6 is good. Lower learning curve than others. But yes, when actually laying track, there are some minor differences. Just be careful. Wire: Make sure you know the gauge and like others have said. Check for copper, how clean and good the wire and insulation looks. Test it for voltage and amps. Most any wire in good shape can be used.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive