Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
3 Responses to Problem With Switch Turnout Connectivity
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
This isn’t clear. What connectivity? If you refer to points connecting to rails, that’s easy. Clean them. Alcohol is safe. I like acetone, but that can damage plastic, so I’m super careful to not touch ties, only the rail. After I clean, I use powdered graphite rubbed on top of rails. Just wipe 3″ or so every 2′ and use your cars to roll and transfer the graphite over the rest of the layout. Now: If you mean electrical contact, about wiring, I’m not much help.
Unfortunately Atlas switches lacks conductivity (electicity continuity), mostly in old or long installed ones. I tried many solutions, as soldering tiny wires on the moving points, contant cleaning etc.
Nothing was good enough, so I´ve changed all them, over 40 units, for Peco ones. Problem solved in full.
OK Michael, how to ensure locos run across points (switches) without stalling.
1. make sure your track and wheels on locos is squeaky clean.
2. Ensure that both frog rails to the running rails are insulated
3. wire jumpers of VERY small gauge flexible wire from the switch blade to the adjacent running rail
4. install “stay a;ives” in your locos
5, turn your standard points into electrofrogs by super gluing fine aluminium foil to the plastic portions of the frog ensuring that each side is isolated from its neighbor and adding a switch per Peco’s tutorials on Youtube.
The first four are traditional fixes. I don’t know of anyone having actually tried No 5, but I have read about it.