Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Removal of Rubber Traction Wheel Rim

Rudy asks:

Hi, if I remove the rubber traction wheel rim on my new HO Piko V60 DB Diesel, will doing that give ‘that’ axel, full electric contact on both wheels, as it crosses the frog, and prevent that slight hesitation? I’ve noticed that if I flip the engine around, it will cross the frog smoothly because the traction tire ‘now’ crosses the frog leaving the other wheel contacting the exposed rail. It’s a small shunting engine, and I only pull 2 or 3 cars with it, so I may not need the traction tire anyway. Any thoughts on this?

7 Responses to Removal of Rubber Traction Wheel Rim

  • Mike W says:

    I don’t know if this STILL holds true or not, but one of my older engines (from the 70’s) had traction tires. The wheel it was on was made slightly smaller to accommodate the traction tire. If I took the traction tires off, the model sat lower on the track than it normally would. This caused the flange to hit the frogs and joiners on the track.
    Again, this was an older engine and this may no longer apply.. just my own past experience

    • Rudy C says:

      Yeah, That one wheel does appear slightly smaller. I was also concerned about it becoming unbalanced. It’s a new purchase and I don’t want to ruin it…Thanks.

  • Kevin Ching says:

    I would fit a frog juicer circuit to the layout that will eliminate any hesitation

  • Robert says:

    Some of my Lima locos have a groove on the wheel where the traction tyre sits. If yours is this design it won’t run well over the point work if the traction tyre is removed.

  • David Stokes says:

    The traction tyres are there for a very good reason – to give the loco traction. Do NOT remove it, as the wheel would not be in the power pickup circuit anyway, so you’d just bugger the loco up.

    However!

    If you removed the wheels with the rubber tyres and replaced them with new “correct” wheels (keep insulated and live alignments) and added a power pick plus pack in some extra weight up then your loco would have less chance of stalling, have another couple of sets of wheels working and enough grunt to pull a reasonable sized train.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive