Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Wiring Tiny LED Lights

Howie models HO and writes:

“Hi. I just got back into the hobby. The LED street lights have the thinnest wire I have ever seen. How do I fasten them to longer wire to get power to them? So tiny!  Help!”

Add your thoughts to assist Howie.

4 Responses to Wiring Tiny LED Lights

  • Dale Arends says:

    Simply solder them to longer, lightweight wires. I would recommend using 18 gauge or thinner wire for the flexibility and because the lights really don’t draw much power. Be sure to protect the joints with heat-shrink tubing, or other means, which will also help reduce stress on the joint.

  • Mel Sloan says:

    I attached 30 ga, stranded wires about 8″ long to my street lamps so I could pass the wires through top of my layout.

  • Bob Rimm says:

    The wire for LED’s varies depending on the light output and size, which determines the current that the LED will use. The 2 big issues with LED’s are making sure that you have the voltage polarity connections and correct voltage. Too high a voltage will usually give you a second of bright light before it burns out. If there is a resistor soldered to the Led, you should have documentation on what voltage is needed for it to work properly. You also need to know which lead gets the + and the – power connection. To learn about how to use LED’s, go on line and look up how to verify which LED leg is + and – along with what happens if you connect it backwards. (There is a good chance it will burn out the LED) Depending on the type of device, LED’s have several operating voltages and current requirments to operate! Go to http://www.DigiKey.com and look up Led’s to get an idea on how to properly use them.

  • Cecon says:

    The wire for LED’s varies depending on the light output and size, which determines the current that the LED will use. The 2 big issues with LED’s are making sure that you have the voltage polarity connections and correct voltage. Too high a voltage will usually give you a second of bright light before it burns out. If there is a resistor soldered to the Led, you should have documentation on what voltage is needed for it

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive