Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Banking On Curve

Tony models OO gauge and asks:

“I think my 10 inch inside radius 180-degree curve built on a wallpaper paste table needs some sort of banking underneath to prevent the engine and rolling stock coming off at any speed. So my question is how high should the outside of the banking be compared to the inside, which I suspect to be zero?”

6 Responses to Banking On Curve

  • Dale Arends says:

    10″ radius? For HO or OO that’s way to sharp. The recommended minimum radius is typically 15 to 18 inches. So unless you are running really short rolling stock and locos, you are unlikely to be able to have satisfactory operations.

    10 inch radius is barely acceptable in N gauge, which is considerably smaller than OO.

  • Finn Sartor says:

    I cannot recommend any banking curve s on any short radius due to issues with bigger engines that will derail more easy . And as Dale Arends is saying that radius is far too small for any gauge.

  • Woody's Workshop says:

    10″ Radius is acceptable for Z & T (or is it TT?) scale.
    Do the math, nothing more than 4% banking which prototypical.

  • Nicholas Westwood says:

    I have super elevated my OO peco flexi- track to 1.5mm max, not prototypical – but looks good when running locos.
    I do however agree that a 10″ radius is too sharp a curve for OO gauge. Most loco manufacturers recommend a minimum ‘2nd radius’ curve which equates to 438mm radius (to the centre line between rails). 438mm = approx 17 inches.
    I also find that trying to bend flexi track to anything less than 21 inch radius and super elevate it is virtually impossible.

  • David Stokes says:

    10 inch radius – and you can get a train around it! Wow!
    Unless your layout is HOn 16 this is a very,very tight radius. 14″ is considered tight,18-22″ medium and anything over that “bearable” My minimum radius is 20″ and I have a USRA light Pacific hates every twist and turn.

  • Tony Smith says:

    The 10 inch radius I made from Peco Flexi-track using a homemade bender, which did the job without any problems. It was made to fit onto an old wallpaper pasting table which separates into 2 parts that I can transport 400 miles to where my grandson lives when it is finished.
    I understand about the rolling stock, I have 2 x 0-4-0 engines with short wagons and homemade coupling because the buffers lock, derailing the stock on the curve when the usual type of coupling are used. I suppose I’ll have to suck it and see with various heights.
    Ta for your replies

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive