Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
What are Droppers?
Following on from the question from Bryan, another Brian posted this question:
“I was just reading a persons question on your site. He mentioned adding DROPPERS to help stop engines from stalling at a switch. My questions are WHAT EXACTLY IS A DROPPER and HOW DO THEY FUNCTION?”
You can add your comments or answers below.
3 Responses to What are Droppers?
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
Usually it is simply an additional wire from track dropping below baseboard so that there is better conductivity from ’main wire’ going around the track area. I have seen recommendations for either every three feet or for every section of track (track joiners may fail with time…)
The answer lies in the fact there are mkre than 1 English language. UK, US, Australia, Canada to name a few. A dropper is inbthe US a “feeder” a thin wire connecting the trsck with the buss. A dropper then is lrobably a UK term.
In model railway terms a dropper is a short, light gauge insulated wire soldered to each of the running rails of a layout. The droppers are then attached, either by mechanical means or solder, to a pair of wires that carry the electricity from the power source to the track. The advantage of using short droppers is that they can be worked on at your bench rather than from under the layout