Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Modular Layout Coupling Sections

A member of the Overberg Modular Railway Club in Hermanus, South Africa has sent in this question for readers:

“We are experiencing difficulties getting our modules to connect successfully with adjoining modules using ‘conecting pieces’ of 110 mm (4.5 inch)Atlas track. We usually insert the connecting pieces into each of the 2 mainline tracks on the module and then slide the fishplates (with the assistance of a small flat screwdriver) over to the fixed track.

Is there an alternative or better method of connecting the rails? Thanks to readers in advance.”

To help the club add your feedback using the green Comments & Feedback link below.

2 Responses to Modular Layout Coupling Sections

  • Tony P says:

    I had only 2 4×4 plywood modules on my old HO layout making it 4×8′ with multiple tracks crossing at the separation point. I dont know exactly what track you are useing but what I did (and if this sounds too simple or you are already doing this) I slid the track joiners onto one side of each track, joined the 2 modules and then slid the joiners onto the opposite side of each track. looking back at your question it sound like this is what you are doing….If this is not good enough and you plan on leaving the modules together “FOREVER?????” then just solder them together. I left mine with the joiners so I could separate the modules and move it and put it back together, this seemed to work very well but each time I joined them I used new joiners. Tony P

  • Seneca60BC says:

    that’s a good idea- however, if you have a BUS from your DCC system, and drop feeders from the rails on either side of the module, you can simply connect the feeder wires to the BUS under the table, and then no need to have the joiners on the track. Yes, there will be a small gap in the track(s) where the two modules meet but this should not be a huge concern, as long as the trains go through without any issues.

    Cheers

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive