Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Transformer Voltage and Wiring Two Transformers On Layout
It sounds like Gerry is having power supply problems and asks readers:
“How can I tell if my transformer puts out enough voltage for my layout? If I have to use two transformers, how do I wire them?”
To see earlier questions submitted use the search box above. If you submitted a question earlier and want to see if anyone has answered it, simply type your name into the search box above, or type in a keyword relating to the subject. For example if you search the name Gerry you will get these results.
This blog is run on a voluntary basis and is a free service for people in the hobby.
If one of the readers is kind enough to answer another reader’s question, it would be good if that questioner would add a quick comment using the COMMENTS link to thank the reader concerned. There are several very thoughtful readers who regularly give their unpaid time to help others in the hobby.
2 Responses to Transformer Voltage and Wiring Two Transformers On Layout
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
The first thing necessary is to measure the output voltage from your transformer with a voltmeter set for DC (Direct Current). Voltmeters are pretty easy to find inexpensively at home centers, Radio Shack, Harbor Freight, etc.
When measuring direct current with a voltmeter the reading will be negative with the probes touching the terminals on the transformer one way. Reverse the probes to opposite terminals to get a positive reading. Voltage should range from 12 to 18 volts with the throttle full on.
IF you decide to use two transformers, you will have to isolate the track to two separate sections. DO NOT connect two transformers to the same section of track.
If your track is mounted on a layout, consider running 12 AWG buss wires under the layout connected to the transformer outputs and use feeder wires to the track at roughly three-foot intervals. Track is generally a poor conductor of electricity.
Hope this helps.
If you want to use two transformers you will need a control panel. Isolate the track into blocks of approximately 1 1/2 train length sections, wire each block to a double-throw switch, and wire a transformer into each side of the switch. This gives you what is called two cab block control.
Block control can get complicated and expensive (those switches aren’t cheap), so if you are planning an extensive layout you might consider DCC. It’s much cheaper to start with DCC than to start with block control and then switch over.
There are many good books on layout wiring, it would be well worth your time and money to invest in one (such as Robert’s E-book) because it will answer questions you haven’t even thought to ask yet.