Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
2 Responses to Train Stops On Turnouts
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
The two most common reasons;
1. The electrical pickup in your locomotive is narrower than the electrical gap found in some turnouts, impeding the flow of power to the motor. This can usually be fixed by adding more wipers or pickups to the wheelsets, something easy to learn if you’ve not done it before.
2. The drivers are actually causing a short circuit at the frog, the place where the two tracks converge. The wheel is connecting the positive side of one track with the negative side of the other, right at the point where the wheel crosses over the diverging point.
Check that when the turnout is thrown that the railguide sits firmly against the main rail. Depending on the type of turnout there could be a small lug under the swithch rail which helps with connection. Check this is actually touching the main rail. Also clean the inside of the main rail so that there is no foreign matter stopping firm contact.