Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Digitrax System Problems
Ron is struggling with technology and asks DCC pros out there for help:
“I recently purchased a digitrax system and I can’t understand how to get the train to move. I cant believe I am asking this question.’I did read the quick start up, but one time it goes down the test track and I can’t control it other times. It sits there and doesn’t move. I’m not into this modern stuff I guess. I do like my switches and my blocks.”
To advise Ron please use the comments link below.
One Response to Digitrax System Problems
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
Did you install the DCC board or DCC module in the loco? If its Atlas and a plug and play board make sure the power contacts are firm. Also make sure the wheels and track are clean. Last of all make sure you have power on the rails. I solder feeder wires to the track about 6 feet apart that come from a 12Guage wire that runs under my layout and connect to the power source.