Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Lower Voltage For LED

Jorge asks readers:
“How to lower the voltage of 12 volts for 1 / 2 volt to turn on the LED HO layout and how to connect in series two, three or more.”

Reader can comment below.

One Response to Lower Voltage For LED

  • Anonymous says:

    I would use a 1000-ohm resistor in series with the LED you can go down to 650 ohm if you want it be brighter. The key issue here is to keep the CURRENT level below the rating listed on the LED. I run mine at half the current rating and then they will last a very, very, long time. You can series them together but again the current rating must NEVER be exceeded. If you have 12v of power and the LED are 2v each you will need 6 LED in series or more to get the LED to be rated at 12v of power output of the supply voltage. at that point you will have to add LED’s or resistors to get the current down to a acceptable level. There is one other option and that is go get a Radio Shack variable voltage adjustable regulator it will cost you about $5 plus parts to build and you could run up to 30 LED’s at15 milliamps each.——AlanC.

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive