Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

model scale railroad houses to construct ho scale n scale oo gauge

Lighting voltage

Dennis asks readers:

“I have an HO controller (Tech4 MRC260) with accessory output of 18.5v. I’m looking to buy lighting for the buildings and the Model Power MDP491, MDP492 lights are rated 12-16 volts. Do I need to step-down the output voltage so as not to blow the bulbs? If so where can I get something like that? Or do I need higher rated lighting?”

Add your answer below.

5 Responses to Lighting voltage

  • Gepatt says:

    Hi
    You must become a new 12 V transformer, and feed all the lamps from it. It is the best way to protect the lamps from an overvoltage, and burn them. Dont forget that you must connect a series resistor with the leds. Guillermo from the Patagonia Argentina

  • Anonymous says:

    Try a 12 volt zener diode

  • Chris M. says:

    Gepatt is right to suggest a 12V (ac or dc) transformer or plug-in power supply (wall wart). Do make sure that you get one with a good output current. Mine supplies 8Vdc at 2A and is supplying some 40+ filament bulbs and about 30 LEDs with plenty of power to spare. Hopefully, the low voltage will mean that the bulbs should last for ever. It also means that the light output will look more natural than running them at their rated voltage.

  • Anonymous says:

    If you don’t want to go to the expense of buying new stuff, just wire the bulbs in series in pairs, they will then recieve 9v each and will be a little less bright which usually looks better too.

  • I use cheap transformers, the kind that come with train sets, for my lights. Connect them to DC output and use the throttle control to control the brightness of the bulbs. Turning them up to high will burn them out so just give them a little juice and they will look more natural this way also. I burn them low and have never burn’t a bulb out and never needed any resistors either.

    Ernest Chudzik, 54

Leave a Reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Reader Poll

Which scale of model trains do you operate or prefer?

View Results

Loading ... Loading ...

SUBMIT YOUR QUESTION

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

N Scale Track Plans

Watch Video

Model Train DCC HELP

Model Train Help Ebook

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive