Comments on: Laying Curves On HO Layout

By: jackson54321

jackson54321 — Sun, 18 Jan 2009 19:24:00 +0000

Guys: You (I think) are referring to the laying of an easement track. Basically, this is nothing more than a series of extremely wide curves of short duration spiraling down to the final radii of your track. If, for example, your final radius is 30″ the easement curve might be 50″ or so at the tangent (straight track) gradually decreasing down to your final 30″. There are many articles in the popular magazines on how to configure them and there also a number of web sites that have printable templates you can use. Using easements is not difficult and they give a tremendous visual appeal to your layout. Definitely recommended for long trains.

By: Anonymous

Anonymous — Sun, 18 Jan 2009 19:04:00 +0000

The “item” you are referring to is known as an easement. Basically, this is nothing more than a LARGE radius curve leading (easing) the train into the sharper final radius of the track. Simple to do and there are many ways to accomplish this. There are a number of sites on the web, there are a number of templates one can purchase and there are many articles in the model railroad magazines on how to do this. Definitely recommended with long trains of 20 plus cars.

By: lwmlwm44

lwmlwm44 — Sat, 17 Jan 2009 16:51:00 +0000

Not familar with a procedure but I would like to know moore about this too. The only thing I can suggest is to make your curves or turns as wide as possible as far as the radius of the curve is.

I have some rather wide turns......but not as wide as some folks use........the radi on my largest turns are 26 and 28 in.

Larry St. Louis Mo.