https://blog.model-train-help.com/2012/05/n-gauge-steam-locomotive-sound-decoder.html?utm_source=rss&utm_medium=rss&utm_campaign=n-gauge-steam-locomotive-sound-decoder Model railroads and model trains Sat, 17 Nov 2012 03:41:10 +0000 hourly 1 https://wordpress.org/?v=6.9.4 https://blog.model-train-help.com/2012/05/n-gauge-steam-locomotive-sound-decoder.html#comment-1326 Thu, 31 May 2012 03:01:30 +0000 http://68.171.208.138/~blogmode/2012/05/n-gauge-steam-locomotive-sound-decoder-installation.html#comment-1326 well bud my sugestion would be kinda simple any high pressure pistons in a _-6-_ should work out fine if its got the 60″ whell hight programed so might want to try the soundtracks decoder for the lima 4-6-2 light its the same loco under the hood as the streamlined 4-6-2 so the sounds should be the same but soundtracks also offers a tool to download new sounds from your computer to the decoder hope this helps and i would also say look around but thay do make a 12v 28-30 awg wire this wire is thin and hard to find but makes wireing up a steam loco in n-scale alot easer just make sure you have the room for the decoder in the tender and paint the wires a black (grimey or oilly works best) to make it look like the water and steam and air lines from the cab to the tender good luck

]]>