By: shaun

shaun — Fri, 08 May 2015 00:18:37 +0000

Thanks for your reply Frank – here goes.
Tracks 1-5 are : 5 – top right – possible small industry.
4 – left middle – possible yard and engine service.
3 & 2 – located at each end of station tracks – for bypass track and another yard/ industry.
1 – is tail from inner left hand loop – this will join with bypass / yard trackage and will also join with 4 to form a loop.
Station ( and all track shown ) is on main level.
The ramp at the bottom of photo, goes down from right to left and goes to hidden main tracks and reversing loop – the track that comes down from the top middle also runs right to left and goes to bottom hidden level and reversing loop.
There is no real theme but so far it allows for continuous running and small switching areas.
I have both UP and SP passenger cars ( hence long station tracks ) and mostly 40 – 60 foot freight cars.
But I can’t work out how to hide the front ramp.

By: Frank

Frank — Wed, 06 May 2015 04:05:39 +0000

You say ” tracks 1 – 5″ but there is no indication on the plan of which ones these are.
Which level is the station on ?
Which way is down on the ramp ?
What is the theme of the layout ?
I think you will get more response if you add some information to make your question and your diagram clearer.

By: shaun

shaun — Fri, 24 Apr 2015 00:38:56 +0000

There must be someone out there with some suggestions – surely…

Comments on: How To Hide An N Scale Ramp

By: shaun

By: Frank

By: shaun