https://blog.model-train-help.com/2017/05/problems-with-peco-turnout-motor.html?utm_source=rss&utm_medium=rss&utm_campaign=problems-with-peco-turnout-motor Model railroads and model trains Wed, 07 Jun 2017 06:39:10 +0000 hourly 1 https://wordpress.org/?v=6.9.4 https://blog.model-train-help.com/2017/05/problems-with-peco-turnout-motor.html#comment-18596 Wed, 07 Jun 2017 06:39:10 +0000 http://blog.model-train-help.com/?p=4460#comment-18596 Suggest you check the alignment of the turnout. I had a similar problem which was resolved by adjusting the alignment of the peco motor under the board with the turnout on top. If this is not perfect the peco just does nothing. Start by loosening the screws holding the peco motor to the underside of the board.

]]> https://blog.model-train-help.com/2017/05/problems-with-peco-turnout-motor.html#comment-18520 Mon, 29 May 2017 08:26:02 +0000 http://blog.model-train-help.com/?p=4460#comment-18520 It looks like you have a short circuit. Perhaps if you post a diagram of what you have done someone may be able to work a solution.

]]>