https://blog.model-train-help.com/2018/02/resetting-cab-decoders.html?utm_source=rss&utm_medium=rss&utm_campaign=resetting-cab-decoders Model railroads and model trains Thu, 08 Feb 2018 16:38:20 +0000 hourly 1 https://wordpress.org/?v=6.9.4 https://blog.model-train-help.com/2018/02/resetting-cab-decoders.html#comment-20700 Thu, 08 Feb 2018 16:38:20 +0000 http://blog.model-train-help.com/?p=4689#comment-20700 I have a very used NCE Pro Cab system. From time to time I open up the controller and using Isopropyl alcohol, I clean the circuit card that mates with the button pads. Over time you will build up debris in and around the buttons, it’s good to clean it out for better operation. The buttons you use the most, will be the ones that quit working. I have even had to replace the rotary decoder that controls the speed due to wear. If your control is wired (not wireless) be sure that the cable is good. You can check it by wiggling the cable and watching to see if it affects the controller.

]]>