Comments on: Starting a Layout with 3 Modules

By: Tim Morlok

Tim Morlok — Wed, 21 Feb 2018 00:44:01 +0000

I would suggest making three modules that are each 6ft x 4ft with the 4ft sides mated together. This would make a 6ft x 12ft layout with 3 feet of room to walk around three of the sides. Each module could have some type of self contained loop or figure eight connected to an outside loop that connects all three together. You can find several track planning (CAD) programs on the internet to test out you layout plans before you build. I use AnyRail which has a free sample with limited segments but unlimited number of trial layouts. I eventually bought the package and get unlimited segments and free updates to the program and am now using AnyRail 6. This program allows you set track heights, slopes (even across turnouts, bridges, etc.), make any segment into a bridge, build a helix and can show height clearances between tracks that cross above or below another track. Good luck with you layout!

By: Rick Saviano

Rick Saviano — Mon, 19 Feb 2018 22:21:04 +0000

The B&O Train Museum in Baltimore, MD (USA) has an HO model railroad display that provided me with an inspiration you might find useful: the layout was divided into 3 sections, and the railroad passed through all three. It was a convoluted plan, so the train didn’t quite travel a boring, predictable path, and went from an urban area to a farming area, then to a coal mining area (if memory serves me correctly). You could also create 3 simple loops with turnouts to connect them; that way, each grandkid could have his or her own oval with stubs for expansion, when their own railroad passion kicks in. My latest layout has City, Yard, and Mountain areas. Although it can no longer be easily divided ( I model in Z), the pieces were combined from a previous modular layout, where I was modeling Downtown Chicago, the Lakefront, and a Gary steel mill.
Good Luck!