Comments on: Can You Ballast Bachmann EZ Track?

By: Kevin Ching

Kevin Ching — Fri, 04 Jan 2019 02:08:31 +0000

Hi Steve, Mike Fifer has done a video on Ballasting Kato track which is similar to ez track but N scale the same Technic is used.

By: john gould

john gould — Wed, 19 Dec 2018 12:24:43 +0000

I have ballasted EZ track, I normally use flex track but had a small section EZ track. Painted the sleepers and rails to get rid of the non scale appearance ,quick and easy. With a small artists brush and eye dropper dropped some dilute white adhesive between the sleepers trying not to get glue onto the face of the sleepers, best do it a section at a time about 3ft and sprinkled the required ballast between the tracks ,when dry removed the excess ballast for later use. I did the same method for the sides of the track. Any bare patches can be patched later . I found the difference between my flex track and the EZ track was not noticeable .When scenery is brought up to your track you can adjust things so the track shoulders do not seem so high. Regards John

By: Ralph DeMent

Ralph DeMent — Wed, 28 Nov 2018 04:07:34 +0000

If you google “woodland scenics ballasting ez track” you’ll get serveral recommended products and three videos covering the subject

By: Brad Beaupain

Brad Beaupain — Wed, 28 Nov 2018 00:46:50 +0000

Yes you can, in fact, Woodland Scenics has had ads in a magazine featuring pictures of EZ Track with ballast spread over part of the track and exposing the other part to show that it is EZ-Track.