Comments on: Types of Flex Track

By: Frank B

Frank B — Thu, 16 Jul 2020 10:14:56 +0000

If you can determine the rail height required, you might be able to buy some old (high rail) track at model rail shows, model shops that sell 2nd hand, or on Ebay.

Some older track is steel, which does become rusty if not maintained (but can be cleaned, polished and oiled to prevent further rusting).

If you have reasonably good manual skills, you can build your own track from scratch, as some modellers do. The rail chairs could be fitted at a slightly increased height to allow for the wide flanges

By: DJ

DJ — Tue, 07 Jul 2020 13:31:46 +0000

In reply to Mike. Another thing you could try is to change out the wheels if you cannot find the track that goes with these pieces.

By: DJ

DJ — Tue, 07 Jul 2020 13:23:54 +0000

Or how about changing the wheels/trucks and keeping the old wheel sets for another day.

By: Mike

Mike — Fri, 03 Jul 2020 10:37:35 +0000

Geoff Bob David Jim thxs

By: Jim Hall

Jim Hall — Wed, 01 Jul 2020 06:56:53 +0000

all the previous answers are correct BUT check for maybe at a On scale of track you my find a scale to suit. Try asking PECO for help. One way if you dont mind the work is to hand lay a larger track than 100. I know there is a 120.

Good luck
Jim Hall

By: David Stokes

David Stokes — Wed, 01 Jul 2020 05:15:50 +0000

Bob’s point says it all. If your equipment won’t run properly on Code 100, then they become static displays, or you could search the speciality auctions looking for the track that originally came with you equipment.

As your gear came from Japan originally, then that is where I would start.

By: Bob DeBarge

Bob DeBarge — Wed, 01 Jul 2020 02:22:49 +0000

I disagree – HO is not HO when it comes to track. It comes in different rail heights. You can find it in Code 55, 70, 83, or 100. The ‘code’ is the ratio of rail height – e.g. Code 83 is 83% of the height of Code 100. You’ll find also that Code 100 has larger black ties, while Code 83 has smaller brown ties with a different spacing. The idea is that Code 83 is more ‘to scale’ and ‘realistic’ than Code 100. Thie issue is that older trains were manufactured with wider wheel flanges, which causes the wheel to hit the ties on newer track with shorter rail heights. So you can change your track or change out the wheels or trucks on your trains. Most of my layout is Code 83, but I choose to not alter my older (and in some cases collectible) trans and I have a couple of tracks build from Code 100 specifically for those older trains (and of course the newer trains will run on it also). It’s a question of whether to be as prototypical as possible or to make concessions to run older trains.

By: geoff

geoff — Tue, 30 Jun 2020 18:01:46 +0000

HO is HO, so any HO wagon will fit on any HO track. But. Marklin uses a three rail system (although they have a central stud instead of a rail) and the wheels on their wagons, as far as I know, are metal and not insulated, so if you put it on a layout that is not marklin while it will fit it will cause a short and so the layout will not work.

The other caveat is that is a wagon is old, it may have wheels with larger flanges than are used these todays and so won’t really fit – similar to your issue with the old model train you have.

The largest track that you can get these days is code 100.