Comments on: N Scale Kato Unitrack Feeders https://blog.model-train-help.com/2020/09/n-scale-kato-unitrack-feeders.html?utm_source=rss&utm_medium=rss&utm_campaign=n-scale-kato-unitrack-feeders Model railroads and model trains Wed, 09 Sep 2020 17:19:49 +0000 hourly 1 https://wordpress.org/?v=6.9.4 By: Charles https://blog.model-train-help.com/2020/09/n-scale-kato-unitrack-feeders.html#comment-40308 Wed, 09 Sep 2020 17:19:49 +0000 http://blog.model-train-help.com/?p=5775#comment-40308 If you tin the wires before soldiering to the rails, it will make it easier.

]]> By: Hervey https://blog.model-train-help.com/2020/09/n-scale-kato-unitrack-feeders.html#comment-40307 Wed, 09 Sep 2020 17:08:33 +0000 http://blog.model-train-help.com/?p=5775#comment-40307 24 ga. is getting pretty small. I use 18 ga. Do yourself a favor and use a larger wire size.

]]> By: Dale Arends https://blog.model-train-help.com/2020/09/n-scale-kato-unitrack-feeders.html#comment-40302 Wed, 09 Sep 2020 15:40:15 +0000 http://blog.model-train-help.com/?p=5775#comment-40302 Sure, 24 gauge wire for feeders should be fine. I ran my entire N gauge layout using 24 gauge feeders every 24 inches along the track. I kept the feeder length to 8 inches and never saw a problem (from the wiring).

]]> By: Mel Sloan https://blog.model-train-help.com/2020/09/n-scale-kato-unitrack-feeders.html#comment-40290 Wed, 09 Sep 2020 10:09:35 +0000 http://blog.model-train-help.com/?p=5775#comment-40290 I have a HO layout with solid 14 ga, for the main power source and solid 22 ga. for my track feeders and I use suitcase connectors which makes connections a snap. My feeders are about 12″ long.

Solid wires are easier to shape and line up to the rails for soldering then stranded.

]]>