Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Amtrak Genesis P42
Newbie to the hobby Peter has started with HO scale and asks:
“I just got an Amtrak Genesis P42 loco. I run it on address 03 all good. The loco address on the engine is 77. My question is, do I program it with address 2? Or, should I set it as 0077 using the? Kindly a newbie. Thanks.”
4 Responses to Amtrak Genesis P42
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
On my system, I set each loco’s address to the road number (using 4 digit addressing on the DCC system) so I always knew the address simply by looking at the loco.
You should program your loco with a “long address” – usually a 4 digit address. I am using three digits as that is the most that the available RTR models for my narrow gauge use.
Using 0077 would work for you, you’ll need to remember of course that you have added two zeros in front of the number on the loco itself. But before doing that consider what other locos you might buy, and what their number is, so you can be consistent with the number of digits you use. Four will always be ok though.
Thanks for the response
Indeed, use 4 digit numbering and follow the road number on the loco. Then simply look at the loco and select it and run it. Less brain power to keep track of things.