https://blog.model-train-help.com/2021/09/decoders-and-speakers.html?utm_source=rss&utm_medium=rss&utm_campaign=decoders-and-speakers Model railroads and model trains Wed, 06 Oct 2021 09:15:33 +0000 hourly 1 https://wordpress.org/?v=6.9.4 https://blog.model-train-help.com/2021/09/decoders-and-speakers.html#comment-54579 Wed, 06 Oct 2021 09:15:33 +0000 http://blog.model-train-help.com/?p=6209#comment-54579 agree Sound traxx would be the best choice, their web site will allow you direct contact with their personnel. Whenever I get a new loco and need a sound decoder and speaker system I ask evern thou they have a selection to choose your own, Also found TCS will do the same. Enjoy your train.

]]> https://blog.model-train-help.com/2021/09/decoders-and-speakers.html#comment-54350 Sat, 18 Sep 2021 14:01:05 +0000 http://blog.model-train-help.com/?p=6209#comment-54350 Palitha,
For the Atlas GP-40 I would go with a Soundtraxx TSU-PNP8 # 885813 as the decoder. For the speaker my go to speaker for all installs is the I phone 4 speaker. If it is too long you can cut it back from the narrow end.
Your Fleishmann model is an AC drive that is non-compatible with a DCC decoder. You can replace the motor with a DC motor. At that point, verify the maximum current draw when stalled. That value will tell you the model of decoder to install. If you are going to stay consistent with Soundtrax I would suspect you will require a TSU-2200 #88407 then set it for a medium sized steam locomotive. It is important that you ensure the drive is electrically isolated from the frame and the electrical pickups. Once again I would go with the I phone 4 speaker. These are readily available on line in ten packs for approximately $20.00. Their sound is truly impressive for a $2.00 speaker.

]]> https://blog.model-train-help.com/2021/09/decoders-and-speakers.html#comment-54247 Wed, 08 Sep 2021 07:31:50 +0000 http://blog.model-train-help.com/?p=6209#comment-54247 Try Sound Traxx

]]>