Comments on: Track Confusion https://blog.model-train-help.com/2022/11/track-confusion.html?utm_source=rss&utm_medium=rss&utm_campaign=track-confusion Model railroads and model trains Wed, 30 Nov 2022 04:49:02 +0000 hourly 1 https://wordpress.org/?v=6.9.4 By: geoff https://blog.model-train-help.com/2022/11/track-confusion.html#comment-60559 Wed, 30 Nov 2022 04:49:02 +0000 http://blog.model-train-help.com/?p=6584#comment-60559 As others say, I’m not sure what you are asking. But if you are trying to work out how long a piece of flex track you need to fill a gap, how I do it is to attach it with rail joiners at one end, and then bend it to shape to fit the gap, and use snips to cut it at the point that gives you the correct length.

I think that trying to work out mathematically how long a piece of curved track you need is going to be very hard since the inside and outside tracks are going to be different lengths.

]]> By: Jim o Myrhum https://blog.model-train-help.com/2022/11/track-confusion.html#comment-60489 Wed, 23 Nov 2022 07:39:00 +0000 http://blog.model-train-help.com/?p=6584#comment-60489 In reply to Glenn Gardiner.

How about that link – I could use that as well

JOM

]]> By: David Stokes https://blog.model-train-help.com/2022/11/track-confusion.html#comment-60423 Wed, 16 Nov 2022 22:02:31 +0000 http://blog.model-train-help.com/?p=6584#comment-60423 Divide your 2.87 inches by 12 to get a fraction of a foot 0.239166667
and multiply by the scale you are working in. In H0 that would be 3.5

]]> By: Glenn Gardiner https://blog.model-train-help.com/2022/11/track-confusion.html#comment-60365 Mon, 14 Nov 2022 04:31:45 +0000 http://blog.model-train-help.com/?p=6584#comment-60365 Stephen, I am with Robert. I am not sure what it is you want. In the meantime I will provide you with this link. The calculator on this page, scroll down the page, will convert decimals to fractions. If this isn’t what you want go to the home page. There are over 30 different calculators on the website and hopefully you will find what you need. I used the calculator above to convert my track plan measurements, in decimals, to fractions, when laying my track. Glenn

]]> By: Robert https://blog.model-train-help.com/2022/11/track-confusion.html#comment-60328 Sat, 12 Nov 2022 22:02:04 +0000 http://blog.model-train-help.com/?p=6584#comment-60328 I am confused with your question. 2.87″, 2.9″, and 4.71″ is already in inches. Do you mean converting these to cm or is your original 2.87ft etc?
Robert

]]> By: Dave Rolstone https://blog.model-train-help.com/2022/11/track-confusion.html#comment-60314 Sat, 12 Nov 2022 10:27:02 +0000 http://blog.model-train-help.com/?p=6584#comment-60314 The easiest way to convert decimals of an inch into fractions of an inch is to use a “Drill Size Conversion Table” you can get books that have various tables for engineers or down load a table from the internet.
2.87″ is 2″ and 7/8″ 2.9″ is 2 and 29/32″? 4.71 is 4″ and 23/32″ if 32nd are two small just use the table to look up the nearest 16th up or down.
Cheers, Dave.

]]>