Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

If You Want Truly Photo-Realistic Plans – You Won’t Find Better!

How Much Can A Loco Pull?

Don asks readers:

“The grade calculator at http://www.modelbuildings.org/free-calculator-tools.html was great thanks.  What I need most is what is the most grade an HO engine should pull ( ballpark )”

10 Responses to How Much Can A Loco Pull?

  • Sheldon Clarksays:

    No steeper than it can manage with the number of vehicles in tow that you wish to have. Personally, I prefer to see no more than about 1:50 (2%).

  • phil johnsonsays:

    a can of worms. I have 3% compensated. I normally run 2 powered units. My club layout has 1.5 and 2% grades 3 6 axle units will handle 75-90 cars. steam, most 4 axle diesel will pull m

  • David STOKESsays:

    Maybe the question should be “How much should a loco pull?
    The answer lies in its prototype. A loco that spent its life shuttling between stations and halts with 2 passenger carriages should be emulated like for like. Our 1:87 0-6-0 might pull 20 coal wagons, but should it? Your full sized “Bigboy” could pull 100 hoppers over the Sierra’s, so your 1:87 version should too. Research your fvourite prototype railway and follow its lead. As for grades, keep under 3% if you can.

  • Don Jenningssays:

    How much a loco can pull depends on the loco. We each have different ones so YOU try with the ones you have to test it yourself on your layout.

    • Sheldon Clarksays:

      That’s about the size of it.

  • Don Jenningssays:

    The best way is for you to try it at home on your layout. That way you will know for sure.
    Try it.

  • Frank Bsays:

    The maximum gradient slope will depend on:
    1) the traction of your locomotive,
    2) the weight of the train it has to pull.

    Weigh your locos and rolling stock. Measure the useful loco traction by the force needed to just slide it along a level track with the power off.
    ( I do this with small weights on a thread running over the edge of a table.)

    Then calculate the total train weight the loco can pull up a certain slope using the principle of the inclined plane. (Get out your School Physics Textbook !)
    (But any track curvature adds friction, so will make it a bit less.)

    “The mechanical advantage of an inclined plane, the factor by which the force is reduced, is equal to the ratio of the length of the sloped surface to the height it spans.”

    Loco traction can be increased by weighting the loco with lead, available as sheet or shot (or just lengths of solder).

    • Sheldon Clarksays:

      Unfortunately, my school physics class (curtailed at age 14) covered only heat, optics, electrics, density & levers, so a translation would be helpful.

    • Sheldon Clarksays:

      And we didn’t have text books before the 6th Form.

  • Richard Hsays:

    Richard H says : I had some problems with One of my slope sections of track. I tried putting the rubber bands that are supposed to help on the wheels that worked OK on N scale but did not work on my new HO scale.
    I’ve had the most luck by cramming in as much weight as I could to the locomotives by removing the cover and adding weights. This solved my problem.

Leave a Reply to Don JenningsCancel reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

Model Railroad Building House Plans

rail yard buildings

Model Train DCC HELP

N Scale Track Plans

Watch Video

Model Train Help Ebook

Watch These Club Videos

Club members access helpful new resources each month: diagrams, video tutorials, articles, track plans and more. Watch the tour videos here.

Scenery Techniques Explained



Submit Your Model Railroading Questions!

Before you submit your model railroading question please add some feedback, answers or comments to other postings on this model train blog. What goes around comes around... so if you can help others in the hobby, someone else may help you.

Important - Please add plenty of supporting details to any question you submit (eg. scale, solutions you have already tried etc.) , as the clearest and best questions usually get the best answers. Also, please check your spelling and punctuation as all questions need to be approved by the blog moderator prior to publication. Approved questions are normally published within a week (if not sooner).

Submit your model train questions here.

Scenery & Layout Ideas

Submit Your Article

Would you like to write an article and have it published?

Preference will be given to articles that help others progress in the hobby, maybe suggesting an idea for their layout, a quick tip or two... or perhaps a little bit of good advice based on your model railroading experiences.

We are all in this hobby together, so the more we can do to share ideas and help each other, the better.

Submit Your Article Here

Model Railroading Blog Archive

Reader Poll

Sorry, there are no polls available at the moment.