Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

If You Want Truly Photo-Realistic Plans – You Won’t Find Better!

Auto Reverse Module – Digitrax and MRC Cab Controller Compatibility

William posted this question to readers:

“I have On30 and M.E. track and turnouts and DCC Cab Controller. I would like to install an automated reverse loop (does not to be that big as I will be running Porters with a few mining cars.)

I am electronically “challenged” and could use advice on what all I would need to set it up. I am in the planning stage now but I would like to know how to wire the turnout and loop section up front to see how feasible my idea is to have trains running on a continual basis in and out of the loop without needing to be manually operated. Is a module AR1 or the like all that is needed or do I need some type of ‘block’ detection? And are Digitrax and MRC cab controllers compatible as far as these loop modules concerned?”

3 Responses to Auto Reverse Module – Digitrax and MRC Cab Controller Compatibility

  • Kevin Chingsays:

    Hi William
    A digitrax AR! will work with any DCC controller as long as you follow the instructions for wiring it to your track.

  • Hervey Howesays:

    William;
    As Kevin stated the AR1 will work with any DCC system. A few things that Digitrax doesn’t tell you though. Leave a few inches of live track coming off the turnout before the insulated joiners for the loop track that ill be connected to the AR1, if you are using live frogs. This is not always required but it is easier to do from the beginning.
    I had to extend the booster short circuit shutdown time. This is easy to do with a digitrax system and probably with others also but I only have experience with Digitrax. Failure to do this will result in the booster shutting down quicker than the AR1 can switch. Your train will simply stall upon entering or exiting the reversing loop as it experiences a short. Do this often enough and you will be buying a new decoder.
    Install the AR1 where it is accessible in case you have to adjust the sensitivity in the future.

  • Maziesays:

    Hi to every one, it’s in fact a pleasant for me to go to see this website, it includes helpful Information.

Leave a Reply to MazieCancel reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

SUBMIT YOUR QUESTION

Submit Your Model Railroading Questions!

Before you submit your model railroading question please add some feedback, answers or comments to other postings on this model train blog. What goes around comes around... so if you can help others in the hobby, someone else may help you.

Important - Please add plenty of supporting details to any question you submit (eg. scale, solutions you have already tried etc.) , as the clearest and best questions usually get the best answers. Also, please check your spelling and punctuation as all questions need to be approved by the blog moderator prior to publication. Approved questions are normally published within a week (if not sooner).

Submit your model train questions here.

Download Your Free Catalog

Use Tiny Railroad Micro Controllers

Download – Print – Build

rail yard buildings

Model Train Help Ebook

Model Train DCC HELP

N Scale Track Plans

Watch Video

Watch These Club Videos

Club members access helpful new resources each month: diagrams, video tutorials, articles, track plans and more. Watch the tour videos here.

Scenery Techniques Explained

NEW TO MODEL TRAINS?

Scenery & Layout Ideas

Model Railroading Blog Archive

Reader Poll

Sorry, there are no polls available at the moment.