Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

If You Want Truly Photo-Realistic Plans – You Won’t Find Better!

Easy Wire Joins Between Modules

Online Model Train Club Member Richo has started work on the second of four planned modules on his N scale layout and questions:

“Is there an easy joining system for disconnecting and reconnecting wires between modules?”

7 Responses to Easy Wire Joins Between Modules

  • David Stokessays:

    Do you plan to exhibit your ;layout or move it regularly?
    If not cheap connectors attached to each module with jumper wires soldered between them would do.

    If so, proprietary 25 pin ex computer plugs ( from your favourite junk shop) are ideal.

    • Richard Gsays:

      David. It won’t get moved much.

  • Dale Arendssays:

    Any kind of keyed male/female connectors. You want them keyed so you can’t plug the together incorrectly. I like the ones from Molex since they are durable and handle decent size wires.

  • Gerald R Hyinksays:

    If only power wires are in concern; I used trailer to car plugs. You cannot miss connect them and they can carry all the dc power you use.

  • Chuck Holsclawsays:

    I would use a terminal strip close to the edge of your modules with your bus wiring connected into it, that way you always have a good solid connection point. This will prevent a voltage drop in between modules.

  • Jamessays:

    I am considering using 7 pin trailer light plugs. Both ends to be spliced 1 to 2, so I can put both Male, and female on each end. Reason being, my layout is not only going to be modular, but each module can go wherever I feel like it. Well almost. Yes, each module will be it’s own industry. So if I choose not to use one, I dont have to worry about it.

  • Geoffreysays:

    If it’s only track power you want connect between boards the method I used was 1/4 wide thin brass strip soldered to each rail then bent over the edge of the base board and the same on the adjoining board so that when the boards are bolted together the brass strips are pressing against each other.

Leave a Reply to David StokesCancel reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

Use Tiny Railroad Micro Controllers

Model Train DCC HELP

N Scale Track Plans

Watch Video

Model Train Help Ebook

Download Your Free Catalog



















Watch These Club Videos

Club members access helpful new resources each month: diagrams, video tutorials, articles, track plans and more. Watch the tour videos here.

Scenery Techniques Explained

NEW TO MODEL TRAINS?

Model Railroad Building House Plans

rail yard buildings

SUBMIT YOUR QUESTION

Submit Your Model Railroading Questions!

Before you submit your model railroading question please add some feedback, answers or comments to other postings on this model train blog. What goes around comes around... so if you can help others in the hobby, someone else may help you.

Important - Please add plenty of supporting details to any question you submit (eg. scale, solutions you have already tried etc.) , as the clearest and best questions usually get the best answers. Also, please check your spelling and punctuation as all questions need to be approved by the blog moderator prior to publication. Approved questions are normally published within a week (if not sooner).

Submit your model train questions here.

Scenery & Layout Ideas

Submit Your Article

Would you like to write an article and have it published?

Preference will be given to articles that help others progress in the hobby, maybe suggesting an idea for their layout, a quick tip or two... or perhaps a little bit of good advice based on your model railroading experiences.

We are all in this hobby together, so the more we can do to share ideas and help each other, the better.

Submit Your Article Here

Model Railroading Blog Archive

Reader Poll

Sorry, there are no polls available at the moment.