Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Slipping Loco Drive Wheels On HO SAR Class 6J Steam Loco
Rhodie asks others for help:
“I have a brand new, kit built, H0 scale DJH manufactured SAR Class 6J steam loco, similar to the Frateschi 4-6-0. The motor, leading bogie, tender power bogies and drive wheels all work fine, except that the drive wheels on the main engine just slip on the track and the engine stands still. I’ve tried adding weight inside the boiler section but that doesn’t help. If they can be obtained, would adding a rubber band or tyre to two of the main drive wheels help or has anyone any other suggestions?”
Comment below.
One Response to Slipping Loco Drive Wheels On HO SAR Class 6J Steam Loco
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
unathafCheck the wheels ( all) to be sure they are on the same level. If the bogies are a slight bit lower this will have the same effect as a jack, lifting the wheels off the rails. Hold a steel straight edge under all wheels on one side and apply slight pressure and hold up to light and check for spaces between wheels and straight edge. Hope this helps you.