Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
New Locomotive Suggestions
Craig models in HO and posted this question:
“I am looking to add a DC locomotive to my operation. I have 18 degree rail with tight operations. The setup is early sixties era. Any suggestions?”
You can add any suggestions to guide Craig under this post.
2 Responses to New Locomotive Suggestions
Leave a Reply
SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
Model Train Help Ebook
four axle locos — go for it!!!! Some 6 axle locos may not appreciate the 18″ radius, but try it, some will work. Rolling stock, most all under 60′ length — no problem, 72′ Passenger cars are OK, but that is where I would stop. Also be aware, some mechanical Reefers and the big covered hoppers need the undercarriage checked. If they have a center beam on the undercarriage, they will not work on anything less than 22′ radius!!
I do run DC and just got done with the corrective – expansion, now everything runs better. Make sure that everything is 18″ radius — otherwise problems.
I agree with Jim. 4 axle locos for sure. Most manufactures make them. Even Scaletrains have a new 4 axle loco which looks awesome and I am sure runs great. Six axle units pulling passenger cars might give you coupling issues on tight curves.