Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Peco Points Corroded
Derek asks readers:
“Hi I have just unpacked the 00 trains from 20Yrs storage and the Peco points have corroded under the frog rivets I have tried gentle emery paper and CRC but the resistance across the points is still quite high. Any help would be appreciated.”
Add your suggestions below.
4 Responses to Peco Points Corroded
Leave a Reply
SUBMIT YOUR QUESTION
Try Noxon Brass cleaner.We used it in the firehouse all the time. I do not know if it will work w/o rubbing but give it a try. Buy a small bottle first. Let us know1
Rather than use CRC which is dielectric, try Peco Electrolube, a lubricant which conducts electricity well.
I have always found silver soder using lots of flux.It usually works pretty well.
Good Luck
Francis Nichols
if its just high resistance try useing grafite grease,it helps to make a better contact.ps wipe off any exess to stop any shorting.