Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!

Brand New! Just Released! 15 Background City Buildings To Download and Build

Athearn Iron Horse HO Starter Train Set

Wayne asks this question:

“I acquired an Athearn Iron Horse HO starter train set which I understand is DCC ready but I haven’t got a decoder yet. When I use the dial to start the loco there is some sound but it doesn’t move until the dial hits 25. Is this to be expected or is there a power distribution issue? I have no problems with it because it is taking off smoothly.”

You can view the answers or have your comments or suggestions published by using the link below.

5 Responses to Athearn Iron Horse HO Starter Train Set

  • Herveysays:

    Wayne,
    Your set is DCC ready but it is an analog (DC) system. While not familiar with this set movement of the loco will be determined by how many volts the loco is receiving. If 25 is 1/4 throttle it appears high. Has the loco been broken in? Let the loco run for a while at various speeds in both directions. Do you hear the motor trying to run (humming) a while before it actually moves? If so it is binding and you will have to open the loco (remove the shell) and see where it is being restricted.

  • phil johnsonsays:

    You already have a decoder on board. DCC unit require upwards of 6 volts to start moving, sound usually around 3.

  • ROBERT SCHWORMsays:

    An analog system is varying the amplitude of the voltage on the rails, like a light bulb.

    DCC always has about 14-16 volts AC on the rails. The decoder rectifies this into DC and uses pulse width modulation (PWM) to the motor, based on your DCC throttle setting.

  • Frank Bsays:

    A DC electric motor will begin to turn at a certain minimum voltage. In a model loco, this voltage willl depend on the weight of the loco and friction of its gearbox, and the weight of the train it is pulling. Most DC controllers will need to be turned up a little way before the loco will start moving.

  • Waynesays:

    I have been educated. Much appreciated guys.

Leave a Reply to phil johnsonCancel reply

Your email address will not be published. Required fields are marked *

Add a photo or image related to your comment (JPEG only)

SUBMIT YOUR QUESTION

Use Tiny Railroad Micro Controllers

Download Your Free Catalog

N Scale Track Plans

Watch Video

Model Train Help Ebook

Model Train DCC HELP

NEW TO MODEL TRAINS?

FREE Tour Inside Club

Take a FREE tour inside the club.

Scenery Techniques Explained

Scenery & Layout Ideas

Model Railroading Blog Archive

Reader Poll

Sorry, there are no polls available at the moment.