Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
3 Responses to Wiring 2 Kato Switches With 1 Controller
Leave a Reply
yes, definitively yes. Each switch has three wires, conect two corresponding wires (right, center or common, left to each contact on the controller and ‘presto’, it is done. Take care to use recomended wire gauge as per your switch manufacturer instructions.
Yes, as Anselmo says, wire the two turnout motors in parallel, so that they operate simultaneously..
Kato switches are two wire. The turnout controller can handle 2 turnouts at once. The double crossover can be thrown with one controller.