Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Double Loop Power-Loc Track
Richard wants to hear from you if you are able to help:
“I have a double loop Power-Loc track. It has a large outer loop with an smaller inner loop which I have 2 switches in each side to run loc in either loop. What would I need to purchase to be able to run 2 locos in different directions? One loco would be in the inner loop and the other loco in the outer loop.”
Add your comments below.
One Response to Double Loop Power-Loc Track
Leave a Reply
SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
Model Train Help Ebook
You would need a separate controller for each loco, either DC or DCC. For DC operation you would need to wire your tracks in a 2 cab configuration with isolated control blocks and toggle switches, for DCC the loco’s decoder would respond to whichever controller has it’s address. DCC is simpler in this regard, but the initial cost of the system plus decoders sometimes scare folks off. Then again, toggle switches aren’t cheap either, and you would need a lot of them (at least 8, four for each loop, to begin with).
There are books available for wiring that should help immensely.