Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Grand Gazebo Wiring
Gene has a question for readers:
“I just bought the HO Grand Gazebo that has a raceway for ease of wiring, however, the raceway is way to small to insert wiring. Using Model Power #511, 12-16v-12inch leads, peel and stick lights. I’ve tried routing out the raceway a bit, but the 2-wires will only go thru about 1/2inch, then stops. One wire will go all the way…but not 2 wires. Is it a faulty building, or?? Don’t think one could go much smaller on the wire, but maybe someone has an idea.”
To help Gene, add your advice below.
One Response to Grand Gazebo Wiring
Leave a Reply
SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
Model Train Help Ebook
Since you are able to feed one wire all the way through it should be a simple matter of feeding a single “Fish wire” all the way through and then attaching the two lead wires to the end of the fish wire with a quick solder. Then pull the fish wire all the way though with the two lead wires attached and cut it loose when you get to your destination. Best of luck!