Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Loco Problem
Abdul wants to hear from readers on their thoughts on why his loco is stopping and starting:
“My n scale locomotives starts when I nudge it, then after travelling a bit it stops. I then give it a nudge and the same is repeated. What could be the reason and how to overcome it?
Add your feedback using the green comments link below.
One Response to Loco Problem
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
There’s not a lot of detail here, but I had a similar problem with an older locomotive recently. I suspect that since it moves at all, the electronics are ok.
It may be a mechanical problem. See if you can apply electricity to the unit without the wheels touching the track. If the train spins along happily, it’s likely that there is something loose in the chassis that is putting pressure on a gear or the worm and causing it to lock.
You may have to tighten a screw, or jam something in there to keep the engine block spaced properly.