Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Cutting Track Sections
Sandy has sent in this idea to share:
“Cutting track can be problematic and a poor job can result in a bad fit and inevitable derailments — no fun! One thing to watch out for is fine metal shavings that could find their way into moving parts on an engine — even more of a problem!! There are difficulties with using an ordinary hacksaw as this definitely spreads metal dust which is difficult to clean up. You can use a Razor Saw but the cutting pressure can put the rails out of gauge.
My solution is to use a pair of side cutters with a flat edge on one side. They cut straight instead of cutting to a tapered point. The side cutters need to be sharp and there is the possibility of breaking them under pressure. However, they work well and are a versatile tool to have in the kit. You can buy side cutters from an electronic store, or have a look at the Xuron site online.”
Thanks Sandy.
One Response to Cutting Track Sections
Leave a Reply
Reader Poll
Loading ...SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
N Scale Track Plans
Watch Video
Model Train DCC HELP
Model Train Help Ebook
NEW TO MODEL TRAINS?
FREE Tour Inside Club
Take a FREE tour inside the club.Scenery Techniques Explained
Scenery & Layout Ideas
Over the years I’ve found easiest, quickest way is a Dremel thin, cut- off wheel. The wheels are #409 for a pack of 36 and you use them with 402 mandrel. ALWAYS wear safety glasses as these wheels shatter very easily.