Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
Interesting Way To Combine Rail Yard Structures For Increased Background Perspective
This new series of low relief railroad yard buildings includes 4 white buildings that jut out on an angle from the background, yet still only take up minimal space. The interesting thing is they can be arranged in a variety of positions to change the look of the complete structure… so the tallest building can be positioned on the end or in the middle. This short video shows how.
More details at http://www.modelbuildings.org/background-yard-structures.html
What’s Better Than Scenery Made With Paper and Plaster?
Ernie has a question for readers:
“I am getting ready to build scenery on my layout and thought of using wads of paper under the plaster cloth. However I’m not sure what to do now after reading somewhere that paper will suck in moister over time. Is this true? What could I use instead of paper?”
Problems Constructing A Helix
Sherri is planning a helix and has a question for readers relating to online helix calculators and uses the example of the free helix calculator at http://www.modelbuildings.org/free-calculator-tools.html to explain her problem:
“On the Helix Calculator “Item D” you can choose a ring width as small as 1″. This number is used to reflect how many sheets or fraction of sheets of plywood you will need as shown in “Item M”.
In “Item F” the formula adds 4″ to whatever radius size you choose in “Item A”. Therefore, I believe the minimum ring width would be 2″ plus one half the width of the gauge track you are using. At that calculation the inside edge of the track would be right at the inside edge of the ring. If you center the track in the ring, then I believe the minimum width of the ring would have to be 4″ instead of the minimum 1″ as shown in “Item D”. Am I correct, or am I missing something?”
Why Do DCC Bachmann Locomotives Run In Wrong Direction?
Duane asks readers:
“I have Bachmann 2 DCC steam locomotives of the same kind. One of them started moving in the wrong direction. I was using a magnet (which is under the track) that came with the Bachmann train system track to uncouple the rolling stock. While, I was in the process of doing so the train was backing up. Then, it goes in the forward direction on its own and stopped working. Did the decoder die? The warranty is no longer good can this be fixed? ”
How Do I Install A Sound Decoder?
Terry asks readers:
“I have an old Proto 2000 engine which must have owned for at least 15 years, and I want to install a sound decoder. I am a bit frightened where to start and if I’ll do any damage. Do I need to unhook little computer board behind the motor? I presume the old board was partly used to control the MARS signal-safety light. I do have resistors and LED’s. Will this decoder operate with the board in position, or will I have problems? Any advice on installation would be greatly appreciated. Thank you.”
How Many Lights Can Be Run Off A Transformer?
Reynold asks readers for advice:
“My N scale layout has 78 building yard lights not including the signals which I have spread over 4 transformers. If possible I would like to have them set up to all operate off just one power supply specifically for lighting. Is this hard to do? What would I need as a minimum transformer power output? I am hoping someone can shed some light on the problem – sorry about the bad pun!!!”
Using Tall Thin Backdrop Buildings To Save Space and Give The Illusion Your Rail Yard Stretches Full Depth
Rail yards are an important part of most model railroads not just because that look interesting, but also because they provide a lot of operational possibilities. Rail yards shouldn’t become a bottleneck that brings the railroad to a stand still. That can be very frustrating!
At the very least there should be enough track for the trains you’re operating and possibly another couple of tracks for train arrivals and departures. However, finding enough space to operate an efficient rail yard can be a problem, and that’s where background buildings can become a great space-saver.
Instead of using a full-sized 3D building which will potential take up valuable space that could otherwise be used for more track, it is possible to achieve the sane effect with thinner “low relief” 3 sided buildings or “flats” which are just frontages. The backdrop buildings need only be an inch or two deep to still give the illusion the building stretches full depth. That way you’ll have space for more yard track. This video shows some good examples of tall backdrop buildings.
How to make tall these tall backdrop buildings
Derailment On A Switch
Steven has an o-gauge, 3 rail layout and asks readers:
“I have a switch that I put it in a loop, so the engine can come back in a different direction. Problem is; once the switch is in main line straight and the engine goes through it, no problem, but when engine is coming around the loop, the engine approach it for a curve switch and the switch freezes on the straight line and it does not turn to a curve position for the engine to go in opposite direction, which causes a derailment. How can I fix this problem. I have limited space for this layout. Please help!!!!!!!!!! Thanks.”
Will 8 Amps Damage My Engines?
Club member Frank has a question for readers:
“I have been dabbling in the hobby for some time now but only in a small space. I thought I would expand my N scale track in another room and go DCC with eventually 8 to 10 engines – that’s my dream. A fellow at the train show said an 8 amp unit might damage my engines and I would be safer sticking to 5 amps. I thought that sounded kinda weird?? Is he right?”
Plans for 3 New Silo Facilities
Don’t panic! If you are not skilled with an airbrush, you don’t need to be… because these 3 new structures are already detailed and weathered to a very high standard. So… NO airbrushing or painting is needed!
- Silo facility #1 (plan B530) is the Silo Storage Company complex
- Silo facility #2 (plan B531) is the Advance Rail Forwarders complex
- Silo facility #3 (plan B532) is the Bulk Road & Rail Silos complex
Plans available from http://www.modelbuildings.org/industrial-silos-models-to-make.html
What to use for Benchwork Materials
Jerome asks readers:
“This will be my first layout when I finally pluck up the courage to get started. I have been doing heaps of reading and research on trains and wiring but taking the first step with construction is harder than I thought. I guess it’s because I’m a bit of a control freak, not very skilled with carpentry, and don’t want to stuff anything up. I have a 12ft x 8ft space and have decided on HO. I thought of using radiata pine for the frame and MDF for the base. Is this ok? What thickness is best? I just need a push to get me started.”
Whats The Best Model Railroad Aisle Width
This quick tip will be particularly helpful for beginners who don’t yet have a layout.
How To Build Rail Bridges
Ryan has a question for readers:
“I am a very new beginner. My train room isn’t built yet but is underway. My HO layout is going to be an L shape and I want to know how to add a couple bridges and waterfall features. Will I have raise my layout up from the beginning and make a gap along the track to implement a bridge? What’s the best material and any advice is appreciated. Thanks.”
Switches and Frogs
Alan asks readers:
“I am having frustrating times with my trains derailing – both locomotives and cars. It is the frogs in the switch that is causing the derailments. I have checked and double checked the switch tension to no avail. Can someone guide me to a solution please?”
NEW! 6 Rail Yard Buildings – Just Released
Just Released are plans for these 6 new railroad yard buildings.The video (which is less than a minute long) shows all 6 buildings. It even shows a close up of one of the buildings revealing the intricate detailing and weathering techniques. These plans can be constructed using whichever materials you prefer using – card, corflute, balsa, foam sheet… you decide. More photos and details are on the web page http://www.modelbuildings.org/railroad-yard-designs.html
They can be purchased individually on as a package deal saving 68%!
SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
Model Train Help Ebook
