Everything on model trains, model railroads, model railways, locomotives, model train layouts, scenery, wiring, DCC and more. Enjoy the world's best hobby... model railroading!
HO Track Clearances
Henry would like some advice from readers and asks:
In building a model railroad, how much should I allow for clearances:
(1) Between parallel tracks?
(2) Around the edge of the layout?
(3) The edge of the track and scenery (trees, buildings, depots)?
(4) The edge of the track and mountain edge?
Add your suggestions below.
2 Responses to HO Track Clearances
Leave a Reply
SUBMIT YOUR QUESTION
Download Your Free Catalog
Use Tiny Railroad Micro Controllers
Model Train Help Ebook
Henry,
I suggest purchasing an HO scale NMRA track gauge. This metal tool has almost a dozen reference points inscribed in its surface which will answer just about all of your questions. They cost around $12 and can be purchased on line or at most hobby shops that carry model railroad supplies.
The distance from the rails to the table edge isn’t any fixed amount but a rough rule of thumb is NOT to make it so narrow that if a car or loco were to derail it would end up on the floor. I’d keep it around three inches from the outside of the ties to the table’s edge. Of course, if you have some sort of raised edging along the outside of the table, that measurement could be less if you want.
Hope this helps,
Geof from the US
The side of track to the edge of a cliff or mountain is pretty much your decision. Whatever looks best would be my call although I wouldn’t go any less than six scale feet which works out to be about 3/4 of an inch.
You’ve got to be careful not to get too close to a rock wall or cliff, especially on curves. Longer cars will hang over the track and side swipe the wall, giving you not only derailments but really nice long scratches on your rolling stock!! You should check it out first.